In textile industry many processes require speed synchronization of more than one motors involved in the process. Rolling of cloth should be synchronized with the speed of weaving spindle to avoid damage and motor speed synchronization is vital in conveyor belt driven by multiple motors. Abrupt load variations may cause hunting or oscillatory behavior in d. c. machines. This behavior can be detrimental to the process. The digitally controlled d. c. machines can have much aggravated phenomenon owing to poor sampling period selection. Traditionally processes are synchronized through mechanical transmission system consisting of a line shaft gears, pullers etc. This project is synchronization of multiple motors using wireless technology. This project uses radio frequency to synchronize motor speeds. One motor acts as transmitter and all the rest as receivers. Thus, if a particular speed is set in the transmitter then all other motors speed would be matched to the same speed of the main motor. The mode of communication is radio frequency. BLDC motors used operate on the basis of PWM control. Each motor has a closed loop feedback mechanism providing RPM reference by a shaft mounted IR sensor arrangement whose output is fed to the controller in the circuit. A display unit displays the full speed and one can enter the desired percentage with help of a keypad to obtain the required speed for all the motors. Manpower and time is also saved in this system.